Pro9 Wall Systems

The Pro9 building system has been developed and engineered for high performance construction in one of the harshest climates in the world - Australia.

Structural Wall System

Pro9 Global’s Structural Wall System is multi-storey load bearing and custom designed to architect's plans.   By involving us early in the design process, costs can be saved by eliminating any unnecessary beams and columns and cleaner, more contemporary, lines can be achieved.

The wall system consists of three key components – internal galvanised steel framing, external sheathing of our proprietary ProBoard (magnesium sulphate cement board) and a dense polyurethane foam core.

The steel frame and outer layer of ‘ProBoard’ is filled with polyurethane, which expands to completely fill the internal cavity creating a relatively lightweight but strong wall with high thermal efficiency.  

The 12mm  ProBoard sheathing, made from a magnesium oxide/magnesium sulphate cement mix, is reinforced with fibre mesh.  This gives the walls a highly durable, A1-non combustible, and weather resistant outer skin.

Following a 50 heat-rain cycle test conducted by the Materials Testing Institute at the University of Stuttgart in Germany the wall system exhibited no cracks, delamination, deformation or bending.

Structural walls are produced in two standard thicknesses.

Thickness Height
and width
Average
weight
Acoustic
(Rw)
Fire
rating
Thermal
(R value)
Load
bearing
PRO85 85mm custom 35 kg/m2 32db 30/30/30* 2.6 29kN
PRO125 125mm custom 38 kg/m2 31db 60/60/60** 4.2 81kN

*  30/30/30 based on 80kN load.
** 60/60/60 based on 100kN load.

Internal Leaf Insulated Wall System

Pro9 Global’s Internal Leaf Insulated Wall System is a substitute for traditional finished stud framed walls (timber or steel frame, waterproofing, insulation, services, gyprock etc.).

It’s an application of Pro9 Global’s standard 85mm panel, designed exclusively to be used in traditional brick veneer construction techniques.

The system uses the 85mm panel as the internal load bearing leaf, in which external brickwork is tied directly to the external face of the wall panels.

It consolidates four trade phases into one product installation, significantly reducing labour and time on site.

Thickness Height
and width
Average
weight
Acoustic
(Rw)
Fire
rating
Thermal
(R value)
Thermal
(U value)
Load
bearing
PRO85 85mm custom 25 kg/m2 31db* 30/30/30 4.3** 0.231** TBC

*  Based on uncertified test results.
** Based on desktop calculations and materials analysis.
All other figures quoted are completed test results to Codemark certification standards.

-

P-210
P-125
P-85

CORE WIDTH

210mm
125mm
85mm

Other Pro9 Products

Double-glazed windows through Pro9’s exclusive licence to import European state-of-the-art windows.

enhanced energy efficiency, durability and aesthetics.
heat transmission greatly reduced compared to single-glaze windows.
noise transmission virtually eliminated.
can be pre-installed in walls for further time and cost savings.
Read More >

External wall facade system for superior thermal insulation within a hard wearing, weather-durable building envelope.

easily fixed to residential and commercial projects to improve thermal and acoustic efficiency.
polyurethane core with magnesium sulphate cement board outer coating for a non-combustible, durable exterior.
suitable for both retrofit and new buildings.
Read More >

Benefits for home owners

> Energy efficiency
> Comfort and liveability
> Acoustic reduction
> Flexible design 

READ MORE >

Benefits for builders

> Engineered for strength
> Faster build time
> Reduced construction cost
> Higher quality build

READ MORE >
SMARTER Walls, BETTER HOMES
CONTACT US: info@pro9.com
Subscribe for updates
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form